← Home | Tutorials
中文 English
🔒 100% Local Browser Processing · Zero Uploads · Zero Privacy Risk

Tilt-Shift Miniature Effect With Predictable Results

By Web PSEditor • Difficulty: Intermediate • 7 min read • Updated: 13 Nov 2026
The photo decides, the sliders only finish
Effects → Tilt Shift: a blur band, a gradient, plus saturation and sharpen.
Open Web PSEditor & Try Tilt-Shift →

The miniature look is not created by blur. It is created by a photo taken from high above, where the brain expects everything to be sharp, and then blurred except for one band. The blur is what confirms an expectation the composition already set up. Apply the same filter to a street-level portrait and you get a portrait with a smeared top and bottom, nothing more.

Effects → Tilt Shift exposes the whole mechanism as seven numbers, all with a live preview. Understanding what each one does turns a random slider session into a repeatable setting.

The Seven Parameters

ControlRange / defaultEffect
Blur Radius0–30, default 10How strong the out-of-focus areas become
Gradient Radius40–100, default 70How wide the transition between sharp and blurred is
X start / Y start0–100 each, defaults 0 / 50One end of the sharp band, in percent of the canvas
X end / Y end0–100 each, defaults 100 / 50The other end of the band
Saturation0–20, default 3Colour boost. Miniature scenes read as more toy-like with punchy colour
Sharpen0–5, default 1Crispness inside the band, contrasting with the blur outside it

The band is defined as a line from (X start, Y start) to (X end, Y end) in percentage coordinates. A horizontal band is (0, 50) → (100, 50). A diagonal one tilts the sharp zone, which suits roads and railway lines running across the frame.

Step by Step

1. Choose the right photo

Taken from at least several metres up, looking down at maybe 30–60°. A city square, a car park, a market, a model railway, a beach with umbrellas. If the horizon is in the frame at eye level, this effect will look like a mistake. There is no setting that fixes the wrong photo.

2. Place the band on the subject

Set X start 0, Y start around 45–55, X end 100, Y end the same value. That gives a horizontal sharp strip through the middle. Move both Y values together — up to include more of the foreground, down to favour the distance. Keep the strip narrow enough that the eye can tell what is meant to be in focus.

3. Set the blur, then the gradient

Start Blur Radius at 10 and Gradient Radius at 70. Then raise Blur Radius until the out-of-focus area clearly reads as unsharp — for a 3000 px image, 12–20 is usually enough, above 25 it starts to look like a filter rather than a lens. Gradient Radius controls the transition: low values give a visible line where sharp becomes blurred, high values feel like a real depth of field.

4. Add colour, not just blur

Saturation 5–8 makes the scene toy-like. Miniatures are usually painted in brighter, flatter colours than real life, and a small boost matches that expectation. Keep Sharpen at 1–2 so the in-focus band has a slightly harder edge than the blur around it.

Why It Sometimes Looks Wrong

A Two-Pass Variation

More convincing depth comes from stacking two passes with different radii: the first at Blur Radius 6 across the whole frame, the second at Blur Radius 20 restricted to the far background by moving the band. Two blur strengths read as a gradual falloff rather than a single plane of defocus, which is closer to how a real tilt-shift lens behaves.

When Not to Use It

💡 High vantage point, narrow horizontal band, Blur Radius 12–20, Gradient Radius 70+, saturation 5–8. If the photo was taken at eye level, skip the effect.

Quick Answers

Why does the tilt-shift effect look fake on my photo?

Usually because the photo was taken at eye level or the subject is too large in frame. Miniature blur works on high-angle shots with many small objects. Also check that the sharp band follows the ground plane — a horizontal strip across a tilted street produces a sharpness pattern no lens can make.

What blur radius and gradient should I use?

Blur Radius 12–20 and Gradient Radius 70 or above for a 3000 px image. Below 25 keeps it reading as defocus rather than a filter; a high gradient value softens the transition so it looks like depth of field instead of a hard-edged band.

Why add saturation to a blur effect?

Because miniature models are painted in brighter, flatter colours than real streets, and the brain associates punchy colour with toys. A saturation of 5–8 supports that association. Without it the blurred photo just looks like a photo with a smeared background.

Web PSEditor is an independent project. Every step on this page is tested against the current build before it is published. If a menu or option has moved, tell us through the contact page and we will correct it.

Related Tutorials

🎯 Hands-on Practice 100% Local

Find an overhead photo of a street or car park, then sweep the band from Y 45 to Y 60 and watch how the subject changes.

Try It in Web PSEditor